Nena 4 Light Rise and Fall Pendant Nena 4 Light Rise and Fall Pendant

Nena 4 light rise and fall pendant in nickel with white opaque glass shades.A modern ceiling pendant with a built in rise and fall mechanism. This allows you to easily adjust the height of the pendant, making it an ideal choice for above a dining table or breakfast bar.The maximum height of the light is 1500mm, as a guide it is usually possible to adjust this by approximately a third using the rise and fall mechanism. It is possible to adjust this further by cutting the cable at the time of installation. However, please be aware that although possible cutting the cable would invalidate the manufacturers warranty.There is no fitted switch or dimmer within this light fitting.This light requires 4 bulb(s) of the same type:4 x GY6.35 Capsule (Included) Max Bulb Wattage = 35W Bulb Voltage = 12VThis product requires an input voltage of 240V.This product has a built-in transformer. Transformers are used to step the input voltage, usually 240V, down to the voltage required by the bulb, usually 12V. Dimming products with transformers can result in the dimmer switch or the light itself buzzing. Using a compatible dimmer switch for the type of transformer will reduce this as much as possible. For this reason we do not always recommend dimming on this fitting.Part of the Nena range by Wofi Lighting, both a 3 and 4 light pendant are available.

Show All Prices

Your Rating Your Comments (optional)
 

Your review will appear on the website after it has been approved. Thank you for your contribution.