Powersafe Outdoor Power Supply Kit 20m Powersafe Outdoor Power Supply Kit 20m

Take your electrical supply out into the garden with this complete DIY garden power system. Complying with all the necessary electrical regulations it only requires basic DIY skills to install. The maximum loading for the kit is 1 x 1000w and 2 x 300w connections. The box contains:

  • Powersafe watergarden circuit breaker
  • 15cm wood drill bit for windows or door frames 30cm masonry drill bit for walls
  • Weatherproof sealing putty
  • Plug and socket adapter brackets
  • Pre-wired plug connected to 20m armoured cable connected to pre-wired socket
  • Pre-wired plug connected to 50cm rubber cable connected to pre-wired powersafe triple outlet switchbox
  • 3 pin plug(un-wired)
  • Rubber cable clip and nails
  • Electrical screwdriver
  • 5 metres of rubber cable(pre-wired to socket)
  • Adapter bracket screws and wall plugs
  • Armoured cable buried warning tape
  • Armoured cable cleats screws and wall plugs
  • Switchbox mounting plate screws and wall plugs.

    Powersafe products comply with legal electrical safety standards electrical standards state that:

  • All outdoor power MUST be protected with a circuit breaker
  • All outdoor electrical components MUST comply with outdoor weatherproof safety standards
  • All power supplies across the garden MUST be carried by metal sheathed armoured cable. If buried warning tape must be applied.

    Click here for product information. Requires Adobe Reader. If you have difficulty opening this document right-click the link and select

    Show All Prices

    • Your Rating Your Comments (optional)
     

    Your review will appear on the website after it has been approved. Thank you for your contribution.